Geometry Class

Returns an array with 6 Planes that describe the sides of a box centered at the origin. The box size is defined by extents, which represents one (positive) corner of the box (i.e. half its actual size).

Returns an array of Planes closely bounding a faceted capsule centered at the origin with radius radius and height height. The parameter sides defines how many planes will be generated for the side part of the capsule, whereas lats gives the number of latitudinal steps at the bottom and top of the capsule. The parameter axis describes the axis along which the capsule is oriented (0 for X, 1 for Y, 2 for Z).

Returns an array of Planes closely bounding a faceted cylinder centered at the origin with radius radius and height height. The parameter sides defines how many planes will be generated for the round part of the cylinder. The parameter axis describes the axis along which the cylinder is oriented (0 for X, 1 for Y, 2 for Z).

Clips the polygon defined by the points in points against the plane and returns the points of the clipped polygon.

Clips polygon_a against polygon_b and returns an array of clipped polygons. This performs between polygons. Returns an empty array if polygon_b completely overlaps polygon_a.

If polygon_b is enclosed by polygon_a, returns an outer polygon (boundary) and inner polygon (hole) which could be distinguished by calling IsPolygonClockwise(Vector2).

Clips polyline against polygon and returns an array of clipped polylines. This performs between the polyline and the polygon. This operation can be thought of as cutting a line with a closed shape.

Given an array of Vector2s, returns the convex hull as a list of points in counterclockwise order. The last point is the same as the first one.

Mutually excludes common area defined by intersection of polygon_a and polygon_b (see IntersectPolygons2d(Vector2, Vector2)) and returns an array of excluded polygons. This performs between polygons. In other words, returns all but common area between polygons.

The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distinguished by calling IsPolygonClockwise(Vector2).

Given the two 3D segments (p1, p2) and (q1, q2), finds those two points on the two segments that are closest to each other. Returns a Vector3 that contains this point on (p1, p2) as well the accompanying point on (q1, q2).

Given the two 2D segments (p1, q1) and (p2, q2), finds those two points on the two segments that are closest to each other. Returns a Vector2 that contains this point on (p1, q1) as well the accompanying point on (p2, q2).

Returns the 3D point on the 3D segment (s1, s2) that is closest to point. The returned point will always be inside the specified segment.

Returns the 2D point on the 2D segment (s1, s2) that is closest to point. The returned point will always be inside the specified segment.

Returns the 3D point on the 3D line defined by (s1, s2) that is closest to point. The returned point can be inside the segment (s1, s2) or outside of it, i.e. somewhere on the line extending from the segment.

Returns the 2D point on the 2D line defined by (s1, s2) that is closest to point. The returned point can be inside the segment (s1, s2) or outside of it, i.e. somewhere on the line extending from the segment.

Used internally by the engine.

Intersects polygon_a with polygon_b and returns an array of intersected polygons. This performs between polygons. In other words, returns common area shared by polygons. Returns an empty array if no intersection occurs.

The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distinguished by calling IsPolygonClockwise(Vector2).

Intersects polyline with polygon and returns an array of intersected polylines. This performs between the polyline and the polygon. This operation can be thought of as chopping a line with a closed shape.

Returns true if point is inside the circle or if it's located exactly on the circle's boundary, otherwise returns false.

Returns true if point is inside polygon or if it's located exactly on polygon's boundary, otherwise returns false.

Returns true if polygon's vertices are ordered in clockwise order, otherwise returns false.

Checks if the two lines (from_a, dir_a) and (from_b, dir_b) intersect. If yes, return the point of intersection as Vector2. If no intersection takes place, returns an empty Variant.

Note: The lines are specified using direction vectors, not end points.

Given an array of Vector2s representing tiles, builds an atlas. The returned dictionary has two keys: points is a vector of Vector2 that specifies the positions of each tile, size contains the overall size of the whole atlas as Vector2.

Merges (combines) polygon_a and polygon_b and returns an array of merged polygons. This performs between polygons.

The operation may result in an outer polygon (boundary) and multiple inner polygons (holes) produced which could be distinguished by calling IsPolygonClockwise(Vector2).

Inflates or deflates polygon by delta units (pixels). If delta is positive, makes the polygon grow outward. If delta is negative, shrinks the polygon inward. Returns an array of polygons because inflating/deflating may result in multiple discrete polygons. Returns an empty array if delta is negative and the absolute value of it approximately exceeds the minimum bounding rectangle dimensions of the polygon.

Each polygon's vertices will be rounded as determined by join_type, see GeometryPolyJoinType.

The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distinguished by calling IsPolygonClockwise(Vector2).

Note: To translate the polygon's vertices specifically, use the Transform2D.xform method:

var polygon = PoolVector2Array([Vector2(0, 0), Vector2(100, 0), Vector2(100, 100), Vector2(0, 100)])
var offset = Vector2(50, 50)
polygon = Transform2D(0, offset).xform(polygon)
print(polygon) # prints [Vector2(50, 50), Vector2(150, 50), Vector2(150, 150), Vector2(50, 150)]

Inflates or deflates polyline by delta units (pixels), producing polygons. If delta is positive, makes the polyline grow outward. Returns an array of polygons because inflating/deflating may result in multiple discrete polygons. If delta is negative, returns an empty array.

Each polygon's vertices will be rounded as determined by join_type, see GeometryPolyJoinType.

Each polygon's endpoints will be rounded as determined by end_type, see GeometryPolyEndType.

The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distinguished by calling IsPolygonClockwise(Vector2).

Returns if point is inside the triangle specified by a, b and c.

Tests if the 3D ray starting at from with the direction of dir intersects the triangle specified by a, b and c. If yes, returns the point of intersection as Vector3. If no intersection takes place, an empty Variant is returned.

Given the 2D segment (segment_from, segment_to), returns the position on the segment (as a number between 0 and 1) at which the segment hits the circle that is located at position circle_position and has radius circle_radius. If the segment does not intersect the circle, -1 is returned (this is also the case if the line extending the segment would intersect the circle, but the segment does not).

Given a convex hull defined though the Planes in the array planes, tests if the segment (from, to) intersects with that hull. If an intersection is found, returns a Vector3 containing the point the intersection and the hull's normal. If no intersecion is found, an the returned array is empty.

Checks if the segment (from, to) intersects the cylinder with height height that is centered at the origin and has radius radius. If no, returns an empty Vector3. If an intersection takes place, the returned array contains the point of intersection and the cylinder's normal at the point of intersection.

Checks if the two segments (from_a, to_a) and (from_b, to_b) intersect. If yes, return the point of intersection as Vector2. If no intersection takes place, returns an empty Variant.

Checks if the segment (from, to) intersects the sphere that is located at sphere_position and has radius sphere_radius. If no, returns an empty Vector3. If yes, returns a Vector3 containing the point of intersection and the sphere's normal at the point of intersection.

Tests if the segment (from, to) intersects the triangle a, b, c. If yes, returns the point of intersection as Vector3. If no intersection takes place, an empty Variant is returned.

Triangulates the area specified by discrete set of points such that no point is inside the circumcircle of any resulting triangle. Returns a Int32 where each triangle consists of three consecutive point indices into points (i.e. the returned array will have n * 3 elements, with n being the number of found triangles). If the triangulation did not succeed, an empty Int32 is returned.

Triangulates the polygon specified by the points in polygon. Returns a Int32 where each triangle consists of three consecutive point indices into polygon (i.e. the returned array will have n * 3 elements, with n being the number of found triangles). If the triangulation did not succeed, an empty Int32 is returned.