PacketPeerUDP Class

Deprecated. Use get_var and put_var parameters instead.

If true, the PacketPeer will allow encoding and decoding of object via GetVar(Boolean) and PutVar(Object, Boolean).

Warning: Deserialized objects can contain code which gets executed. Do not use this option if the serialized object comes from untrusted sources to avoid potential security threats such as remote code execution.

Maximum buffer size allowed when encoding Variants. Raise this value to support heavier memory allocations.

The PutVar(Object, Boolean) method allocates memory on the stack, and the buffer used will grow automatically to the closest power of two to match the size of the Variant. If the Variant is bigger than encode_buffer_max_size, the method will error out with .

Virtual method which can be overridden to customize the return value of Get(String).

Returns the given property. Returns null if the property does not exist.

Virtual method which can be overridden to customize the return value of GetPropertyList.

Returns the object's property list as an Array of dictionaries.

Each property's Dictionary must contain at least name: String and type: int (see VariantType) entries. Optionally, it can also include hint: int (see PropertyHint), hint_string: String, and usage: int (see PropertyUsageFlags).

Called whenever the object receives a notification, which is identified in what by a constant. The base Object has two constants and , but subclasses such as Node define a lot more notifications which are also received by this method.

Virtual method which can be overridden to customize the return value of Set(String, Object).

Sets a property. Returns true if the property exists.

Adds a user-defined signal. Arguments are optional, but can be added as an Array of dictionaries, each containing name: String and type: int (see VariantType) entries.

Calls the method on the object and returns the result. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example:

call("set", "position", Vector2(42.0, 0.0))

Note: In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase).

Calls the method on the object during idle time. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example:

call_deferred("set", "position", Vector2(42.0, 0.0))

Note: In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase).

Calls the method on the object and returns the result. Contrarily to Call(String, Object), this method does not support a variable number of arguments but expects all parameters to be via a single Array.

callv("set", [ "position", Vector2(42.0, 0.0) ])

Returns true if the object can translate strings. See SetMessageTranslation(Boolean) and Tr(String).

Closes the UDP socket the PacketPeerUDP is currently listening on.

Connects a signal to a method on a target object. Pass optional binds to the call as an Array of parameters. These parameters will be passed to the method after any parameter used in the call to EmitSignal(String, Object). Use flags to set deferred or one-shot connections. See ObjectConnectFlags constants.

A signal can only be connected once to a method. It will throw an error if already connected, unless the signal was connected with . To avoid this, first, use IsConnected(String, Object, String) to check for existing connections.

If the target is destroyed in the game's lifecycle, the connection will be lost.

Examples:

connect("pressed", self, "_on_Button_pressed") # BaseButton signal
connect("text_entered", self, "_on_LineEdit_text_entered") # LineEdit signal
connect("hit", self, "_on_Player_hit", [ weapon_type, damage ]) # User-defined signal

An example of the relationship between binds passed to Connect(String, Object, String, Array, UInt32) and parameters used when calling EmitSignal(String, Object):

connect("hit", self, "_on_Player_hit", [ weapon_type, damage ]) # weapon_type and damage are passed last
emit_signal("hit", "Dark lord", 5) # "Dark lord" and 5 are passed first
func _on_Player_hit(hit_by, level, weapon_type, damage):
    print("Hit by %s (lvl %d) with weapon %s for %d damage" % [hit_by, level, weapon_type, damage])

Calling this method connects this UDP peer to the given host/port pair. UDP is in reality connectionless, so this option only means that incoming packets from different addresses are automatically discarded, and that outgoing packets are always sent to the connected address (future calls to SetDestAddress(String, Int32) are not allowed). This method does not send any data to the remote peer, to do that, use PutVar(Object, Boolean) or PutPacket(Byte) as usual. See also UDPServer.

Note: Connecting to the remote peer does not help to protect from malicious attacks like IP spoofing, etc. Think about using an encryption technique like SSL or DTLS if you feel like your application is transferring sensitive information.

Disconnects a signal from a method on the given target.

If you try to disconnect a connection that does not exist, the method will throw an error. Use IsConnected(String, Object, String) to ensure that the connection exists.

Emits the given signal. The signal must exist, so it should be a built-in signal of this class or one of its parent classes, or a user-defined signal. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example:

emit_signal("hit", weapon_type, damage)
emit_signal("game_over")

Deletes the object from memory immediately. For Nodes, you may want to use QueueFree to queue the node for safe deletion at the end of the current frame.

Important: If you have a variable pointing to an object, it will not be assigned to null once the object is freed. Instead, it will point to a previously freed instance and you should validate it with @GDScript.is_instance_valid before attempting to call its methods or access its properties.

Returns the Variant value of the given property. If the property doesn't exist, this will return null.

Note: In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase).

Returns the number of packets currently available in the ring-buffer.

Returns the object's class as a String.

Returns an Array of dictionaries with information about signals that are connected to the object.

Each Dictionary contains three String entries:

- source is a reference to the signal emitter.

- signal_name is the name of the connected signal.

- method_name is the name of the method to which the signal is connected.

Gets the object's property indexed by the given NodePath. The node path should be relative to the current object and can use the colon character (:) to access nested properties. Examples: "position:x" or "material:next_pass:blend_mode".

Returns the object's unique instance ID.

This ID can be saved in EncodedObjectAsID, and can be used to retrieve the object instance with @GDScript.instance_from_id.

Returns the object's metadata entry for the given name.

Returns the object's metadata as a String.

Returns the object's methods and their signatures as an Array.

Gets a raw packet.

Returns the error state of the last packet received (via GetPacket and GetVar(Boolean)).

Returns the IP of the remote peer that sent the last packet(that was received with GetPacket or GetVar(Boolean)).

Returns the port of the remote peer that sent the last packet(that was received with GetPacket or GetVar(Boolean)).

Returns the object's property list as an Array of dictionaries.

Each property's Dictionary contain at least name: String and type: int (see VariantType) entries. Optionally, it can also include hint: int (see PropertyHint), hint_string: String, and usage: int (see PropertyUsageFlags).

Returns the object's Script instance, or null if none is assigned.

Returns an Array of connections for the given signal.

Returns the list of signals as an Array of dictionaries.

Gets a Variant. If allow_objects (or AllowObjectDecoding) is true, decoding objects is allowed.

Warning: Deserialized objects can contain code which gets executed. Do not use this option if the serialized object comes from untrusted sources to avoid potential security threats such as remote code execution.

Returns true if a metadata entry is found with the given name.

Returns true if the object contains the given method.

Returns true if the given signal exists.

Returns true if the given user-defined signal exists. Only signals added using AddUserSignal(String, Array) are taken into account.

Initializes the internal reference counter. Use this only if you really know what you are doing.

Returns whether the initialization was successful.

Returns true if signal emission blocking is enabled.

Returns true if the object inherits from the given class.

Returns true if a connection exists for a given signal, target, and method.

Returns true if the UDP socket is open and has been connected to a remote address. See ConnectToHost(String, Int32).

Returns whether this PacketPeerUDP is listening.

Returns true if the QueueFree method was called for the object.

Joins the multicast group specified by multicast_address using the interface identified by interface_name.

You can join the same multicast group with multiple interfaces. Use GetLocalInterfaces to know which are available.

Note: Some Android devices might require the CHANGE_WIFI_MULTICAST_STATE permission for multicast to work.

Removes the interface identified by interface_name from the multicast group specified by multicast_address.

Makes this PacketPeerUDP listen on the port binding to bind_address with a buffer size recv_buf_size.

If bind_address is set to "*" (default), the peer will listen on all available addresses (both IPv4 and IPv6).

If bind_address is set to "0.0.0.0" (for IPv4) or "::" (for IPv6), the peer will listen on all available addresses matching that IP type.

If bind_address is set to any valid address (e.g. "192.168.1.101", "::1", etc), the peer will only listen on the interface with that addresses (or fail if no interface with the given address exists).

Send a given notification to the object, which will also trigger a call to the _Notification(Int32) method of all classes that the object inherits from.

If reversed is true, _Notification(Int32) is called first on the object's own class, and then up to its successive parent classes. If reversed is false, _Notification(Int32) is called first on the highest ancestor (Object itself), and then down to its successive inheriting classes.

Notify the editor that the property list has changed, so that editor plugins can take the new values into account. Does nothing on export builds.

Sends a raw packet.

Sends a Variant as a packet. If full_objects (or AllowObjectDecoding) is true, encoding objects is allowed (and can potentially include code).

Increments the internal reference counter. Use this only if you really know what you are doing.

Returns true if the increment was successful, false otherwise.

Removes a given entry from the object's metadata. See also SetMeta(String, Object).

Assigns a new value to the given property. If the property does not exist, nothing will happen.

Note: In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase).

If set to true, signal emission is blocked.

Enable or disable sending of broadcast packets (e.g. set_dest_address("255.255.255.255", 4343). This option is disabled by default.

Note: Some Android devices might require the CHANGE_WIFI_MULTICAST_STATE permission and this option to be enabled to receive broadcast packets too.

Assigns a new value to the given property, after the current frame's physics step. This is equivalent to calling Set(String, Object) via CallDeferred(String, Object), i.e. call_deferred("set", property, value).

Note: In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase).

Sets the destination address and port for sending packets and variables. A hostname will be resolved using DNS if needed.

Note: SetBroadcastEnabled(Boolean) must be enabled before sending packets to a broadcast address (e.g. 255.255.255.255).

Assigns a new value to the property identified by the NodePath. The node path should be relative to the current object and can use the colon character (:) to access nested properties. Example:

set_indexed("position", Vector2(42, 0))
set_indexed("position:y", -10)
print(position) # (42, -10)

Defines whether the object can translate strings (with calls to Tr(String)). Enabled by default.

Adds, changes or removes a given entry in the object's metadata. Metadata are serialized and can take any Variant value.

To remove a given entry from the object's metadata, use RemoveMeta(String). Metadata is also removed if its value is set to null. This means you can also use set_meta("name", null) to remove metadata for "name".

Assigns a script to the object. Each object can have a single script assigned to it, which are used to extend its functionality.

If the object already had a script, the previous script instance will be freed and its variables and state will be lost. The new script's method will be called.

Translates a message using translation catalogs configured in the Project Settings.

Only works if message translation is enabled (which it is by default), otherwise it returns the message unchanged. See SetMessageTranslation(Boolean).

Decrements the internal reference counter. Use this only if you really know what you are doing.

Returns true if the decrement was successful, false otherwise.

Waits for a packet to arrive on the listening port. See Listen(Int32, String, Int32).

Note: Wait can't be interrupted once it has been called. This can be worked around by allowing the other party to send a specific "death pill" packet like this:

# Server
socket.set_dest_address("127.0.0.1", 789)
socket.put_packet("Time to stop".to_ascii())

# Client
while socket.wait() == OK:
    var data = socket.get_packet().get_string_from_ascii()
    if data == "Time to stop":
        return