CanvasItem Methods

Overridable function called by the engine (if defined) to draw the canvas item.

Called when the node enters the SceneTree (e.g. upon instancing, scene changing, or after calling AddChild(Node, Boolean) in a script). If the node has children, its _EnterTree callback will be called first, and then that of the children.

Corresponds to the notification in _Notification(Int32).

Called when the node is about to leave the SceneTree (e.g. upon freeing, scene changing, or after calling RemoveChild(Node) in a script). If the node has children, its _ExitTree callback will be called last, after all its children have left the tree.

Corresponds to the notification in _Notification(Int32) and signal tree_exiting. To get notified when the node has already left the active tree, connect to the tree_exited.

Virtual method which can be overridden to customize the return value of Get(String).

Returns the given property. Returns null if the property does not exist.

The string returned from this method is displayed as a warning in the Scene Dock if the script that overrides it is a tool script.

Returning an empty string produces no warning.

Call UpdateConfigurationWarning when the warning needs to be updated for this node.

Virtual method which can be overridden to customize the return value of GetPropertyList.

Returns the object's property list as an Array of dictionaries.

Each property's Dictionary must contain at least name: String and type: int (see VariantType) entries. Optionally, it can also include hint: int (see PropertyHint), hint_string: String, and usage: int (see PropertyUsageFlags).

Called when there is an input event. The input event propagates up through the node tree until a node consumes it.

It is only called if input processing is enabled, which is done automatically if this method is overridden, and can be toggled with SetProcessInput(Boolean).

To consume the input event and stop it propagating further to other nodes, SetInputAsHandled can be called.

For gameplay input, _UnhandledInput(InputEvent) and _UnhandledKeyInput(InputEventKey) are usually a better fit as they allow the GUI to intercept the events first.

Note: This method is only called if the node is present in the scene tree (i.e. if it's not orphan).

Called whenever the object receives a notification, which is identified in what by a constant. The base Object has two constants and , but subclasses such as Node define a lot more notifications which are also received by this method.

Called during the physics processing step of the main loop. Physics processing means that the frame rate is synced to the physics, i.e. the delta variable should be constant. delta is in seconds.

It is only called if physics processing is enabled, which is done automatically if this method is overridden, and can be toggled with SetPhysicsProcess(Boolean).

Corresponds to the notification in _Notification(Int32).

Note: This method is only called if the node is present in the scene tree (i.e. if it's not orphan).

Called during the processing step of the main loop. Processing happens at every frame and as fast as possible, so the delta time since the previous frame is not constant. delta is in seconds.

It is only called if processing is enabled, which is done automatically if this method is overridden, and can be toggled with SetProcess(Boolean).

Corresponds to the notification in _Notification(Int32).

Note: This method is only called if the node is present in the scene tree (i.e. if it's not orphan).

Called when the node is "ready", i.e. when both the node and its children have entered the scene tree. If the node has children, their _Ready callbacks get triggered first, and the parent node will receive the ready notification afterwards.

Corresponds to the notification in _Notification(Int32). See also the onready keyword for variables.

Usually used for initialization. For even earlier initialization, may be used. See also _EnterTree.

Note: _Ready may be called only once for each node. After removing a node from the scene tree and adding again, _ready will not be called for the second time. This can be bypassed with requesting another call with RequestReady, which may be called anywhere before adding the node again.

Virtual method which can be overridden to customize the return value of Set(String, Object).

Sets a property. Returns true if the property exists.

Called when an InputEvent hasn't been consumed by _Input(InputEvent) or any GUI. The input event propagates up through the node tree until a node consumes it.

It is only called if unhandled input processing is enabled, which is done automatically if this method is overridden, and can be toggled with SetProcessUnhandledInput(Boolean).

To consume the input event and stop it propagating further to other nodes, SetInputAsHandled can be called.

For gameplay input, this and _UnhandledKeyInput(InputEventKey) are usually a better fit than _Input(InputEvent) as they allow the GUI to intercept the events first.

Note: This method is only called if the node is present in the scene tree (i.e. if it's not orphan).

Called when an InputEventKey hasn't been consumed by _Input(InputEvent) or any GUI. The input event propagates up through the node tree until a node consumes it.

It is only called if unhandled key input processing is enabled, which is done automatically if this method is overridden, and can be toggled with SetProcessUnhandledKeyInput(Boolean).

To consume the input event and stop it propagating further to other nodes, SetInputAsHandled can be called.

For gameplay input, this and _UnhandledInput(InputEvent) are usually a better fit than _Input(InputEvent) as they allow the GUI to intercept the events first.

Note: This method is only called if the node is present in the scene tree (i.e. if it's not orphan).

Adds a child node. Nodes can have any number of children, but every child must have a unique name. Child nodes are automatically deleted when the parent node is deleted, so an entire scene can be removed by deleting its topmost node.

If legible_unique_name is true, the child node will have a human-readable name based on the name of the node being instanced instead of its type.

Note: If the child node already has a parent, the function will fail. Use RemoveChild(Node) first to remove the node from its current parent. For example:

if child_node.get_parent():
    child_node.get_parent().remove_child(child_node)
add_child(child_node)

Note: If you want a child to be persisted to a PackedScene, you must set Owner in addition to calling AddChild(Node, Boolean). This is typically relevant for tool scripts and editor plugins. If AddChild(Node, Boolean) is called without setting Owner, the newly added Node will not be visible in the scene tree, though it will be visible in the 2D/3D view.

Adds child_node as a child. The child is placed below the given node in the list of children.

If legible_unique_name is true, the child node will have a human-readable name based on the name of the node being instanced instead of its type.

Adds the node to a group. Groups are helpers to name and organize a subset of nodes, for example "enemies" or "collectables". A node can be in any number of groups. Nodes can be assigned a group at any time, but will not be added until they are inside the scene tree (see IsInsideTree). See notes in the description, and the group methods in SceneTree.

The persistent option is used when packing node to PackedScene and saving to file. Non-persistent groups aren't stored.

Adds a user-defined signal. Arguments are optional, but can be added as an Array of dictionaries, each containing name: String and type: int (see VariantType) entries.

Calls the method on the object and returns the result. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example:

call("set", "position", Vector2(42.0, 0.0))

Note: In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase).

Calls the method on the object during idle time. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example:

call_deferred("set", "position", Vector2(42.0, 0.0))

Note: In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase).

Calls the method on the object and returns the result. Contrarily to Call(String, Object), this method does not support a variable number of arguments but expects all parameters to be via a single Array.

callv("set", [ "position", Vector2(42.0, 0.0) ])

Returns true if the node can process while the scene tree is paused (see PauseMode). Always returns true if the scene tree is not paused, and false if the node is not in the tree.

Returns true if the object can translate strings. See SetMessageTranslation(Boolean) and Tr(String).

Connects a signal to a method on a target object. Pass optional binds to the call as an Array of parameters. These parameters will be passed to the method after any parameter used in the call to EmitSignal(String, Object). Use flags to set deferred or one-shot connections. See ObjectConnectFlags constants.

A signal can only be connected once to a method. It will throw an error if already connected, unless the signal was connected with . To avoid this, first, use IsConnected(String, Object, String) to check for existing connections.

If the target is destroyed in the game's lifecycle, the connection will be lost.

Examples:

connect("pressed", self, "_on_Button_pressed") # BaseButton signal
connect("text_entered", self, "_on_LineEdit_text_entered") # LineEdit signal
connect("hit", self, "_on_Player_hit", [ weapon_type, damage ]) # User-defined signal

An example of the relationship between binds passed to Connect(String, Object, String, Array, UInt32) and parameters used when calling EmitSignal(String, Object):

connect("hit", self, "_on_Player_hit", [ weapon_type, damage ]) # weapon_type and damage are passed last
emit_signal("hit", "Dark lord", 5) # "Dark lord" and 5 are passed first
func _on_Player_hit(hit_by, level, weapon_type, damage):
    print("Hit by %s (lvl %d) with weapon %s for %d damage" % [hit_by, level, weapon_type, damage])

Disconnects a signal from a method on the given target.

If you try to disconnect a connection that does not exist, the method will throw an error. Use IsConnected(String, Object, String) to ensure that the connection exists.

Draws an arc between the given angles. The larger the value of point_count, the smoother the curve.

Draws a string character using a custom font. Returns the advance, depending on the character width and kerning with an optional next character.

Draws a colored circle.

Draws a colored polygon of any amount of points, convex or concave.

Draws a line from a 2D point to another, with a given color and width. It can be optionally antialiased.

Draws a Mesh in 2D, using the provided texture. See MeshInstance2D for related documentation.

Draws multiple, parallel lines with a uniform color.

Note: width and antialiased are currently not implemented and have no effect.

Draws multiple, parallel lines with a uniform width and segment-by-segment coloring. Colors assigned to line segments match by index between points and colors.

Note: width and antialiased are currently not implemented and have no effect.

Draws a MultiMesh in 2D with the provided texture. See MultiMeshInstance2D for related documentation.

Draws a polygon of any amount of points, convex or concave.

Draws interconnected line segments with a uniform color and width and optional antialiasing.

Draws interconnected line segments with a uniform width, segment-by-segment coloring, and optional antialiasing. Colors assigned to line segments match by index between points and colors.

Draws a custom primitive. 1 point for a point, 2 points for a line, 3 points for a triangle and 4 points for a quad.

Draws a rectangle. If filled is true, the rectangle will be filled with the color specified. If filled is false, the rectangle will be drawn as a stroke with the color and width specified. If antialiased is true, the lines will be antialiased.

Note: width and antialiased are only effective if filled is false.

Sets a custom transform for drawing via components. Anything drawn afterwards will be transformed by this.

Sets a custom transform for drawing via matrix. Anything drawn afterwards will be transformed by this.

Draws text using the specified font at the position (bottom-left corner using the baseline of the font). The text will have its color multiplied by modulate. If clip_w is greater than or equal to 0, the text will be clipped if it exceeds the specified width.

Example using the default project font:

# If using this method in a script that redraws constantly, move the
# `default_font` declaration to a member variable assigned in `_ready()`
# so the Control is only created once.
var default_font = Control.new().get_font("font")
draw_string(default_font, Vector2(64, 64), "Hello world")

See also Draw(RID, Vector2, String, NullableColor, Int32, NullableColor).

Draws a styled rectangle.

Draws a texture at a given position.

Draws a textured rectangle at a given position, optionally modulated by a color. If transpose is true, the texture will have its X and Y coordinates swapped.

Draws a textured rectangle region at a given position, optionally modulated by a color. If transpose is true, the texture will have its X and Y coordinates swapped.

Duplicates the node, returning a new node.

You can fine-tune the behavior using the flags (see NodeDuplicateFlags).

Note: It will not work properly if the node contains a script with constructor arguments (i.e. needs to supply arguments to method). In that case, the node will be duplicated without a script.

Emits the given signal. The signal must exist, so it should be a built-in signal of this class or one of its parent classes, or a user-defined signal. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example:

emit_signal("hit", weapon_type, damage)
emit_signal("game_over")

Finds a descendant of this node whose name matches mask as in String.match (i.e. case-sensitive, but "*" matches zero or more characters and "?" matches any single character except ".").

Note: It does not match against the full path, just against individual node names.

If owned is true, this method only finds nodes whose owner is this node. This is especially important for scenes instantiated through a script, because those scenes don't have an owner.

Note: As this method walks through all the descendants of the node, it is the slowest way to get a reference to another node. Whenever possible, consider using GetNode(NodePath) instead. To avoid using FindNode(String, Boolean, Boolean) too often, consider caching the node reference into a variable.

Finds the first parent of the current node whose name matches mask as in String.match (i.e. case-sensitive, but "*" matches zero or more characters and "?" matches any single character except ".").

Note: It does not match against the full path, just against individual node names.

Note: As this method walks upwards in the scene tree, it can be slow in large, deeply nested scene trees. Whenever possible, consider using GetNode(NodePath) instead. To avoid using FindParent(String) too often, consider caching the node reference into a variable.

Forces the transform to update. Transform changes in physics are not instant for performance reasons. Transforms are accumulated and then set. Use this if you need an up-to-date transform when doing physics operations.

Deletes the object from memory immediately. For Nodes, you may want to use QueueFree to queue the node for safe deletion at the end of the current frame.

Important: If you have a variable pointing to an object, it will not be assigned to null once the object is freed. Instead, it will point to a previously freed instance and you should validate it with @GDScript.is_instance_valid before attempting to call its methods or access its properties.

Returns the Variant value of the given property. If the property doesn't exist, this will return null.

Note: In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase).

Returns the RID of the World2D canvas where this item is in.

Returns the canvas item RID used by VisualServer for this item.

Returns the transform matrix of this item's canvas.

Returns the number of child nodes.

Returns an array of references to node's children.

Returns the object's class as a String.

Returns the global position of the mouse.

Returns the global transform matrix of this item.

Returns the global transform matrix of this item in relation to the canvas.

Returns an array listing the groups that the node is a member of.

Returns an Array of dictionaries with information about signals that are connected to the object.

Each Dictionary contains three String entries:

- source is a reference to the signal emitter.

- signal_name is the name of the connected signal.

- method_name is the name of the method to which the signal is connected.

Returns the node's index, i.e. its position among the siblings of its parent.

Gets the object's property indexed by the given NodePath. The node path should be relative to the current object and can use the colon character (:) to access nested properties. Examples: "position:x" or "material:next_pass:blend_mode".

Returns the object's unique instance ID.

This ID can be saved in EncodedObjectAsID, and can be used to retrieve the object instance with @GDScript.instance_from_id.

Returns the mouse position relative to this item's position.

Returns the object's metadata entry for the given name.

Returns the object's metadata as a String.

Returns the object's methods and their signatures as an Array.

Returns the peer ID of the network master for this node. See SetNetworkMaster(Int32, Boolean).

Fetches a node and one of its resources as specified by the NodePath's subname (e.g. Area2D/CollisionShape2D:shape). If several nested resources are specified in the NodePath, the last one will be fetched.

The return value is an array of size 3: the first index points to the Node (or null if not found), the second index points to the Resource (or null if not found), and the third index is the remaining NodePath, if any.

For example, assuming that Area2D/CollisionShape2D is a valid node and that its shape property has been assigned a RectangleShape2D resource, one could have this kind of output:

print(get_node_and_resource("Area2D/CollisionShape2D")) # [[CollisionShape2D:1161], Null, ]
print(get_node_and_resource("Area2D/CollisionShape2D:shape")) # [[CollisionShape2D:1161], [RectangleShape2D:1156], ]
print(get_node_and_resource("Area2D/CollisionShape2D:shape:extents")) # [[CollisionShape2D:1161], [RectangleShape2D:1156], :extents]

Returns the absolute path of the current node. This only works if the current node is inside the scene tree (see IsInsideTree).

Returns the relative NodePath from this node to the specified node. Both nodes must be in the same scene or the function will fail.

Returns the time elapsed (in seconds) since the last physics-bound frame (see _PhysicsProcess(Single)). This is always a constant value in physics processing unless the frames per second is changed via IterationsPerSecond.

Returns the node's order in the scene tree branch. For example, if called on the first child node the position is 0.

Returns the time elapsed (in seconds) since the last process callback. This value may vary from frame to frame.

Returns the object's property list as an Array of dictionaries.

Each property's Dictionary contain at least name: String and type: int (see VariantType) entries. Optionally, it can also include hint: int (see PropertyHint), hint_string: String, and usage: int (see PropertyUsageFlags).

Returns true if this is an instance load placeholder. See InstancePlaceholder.

Returns the object's Script instance, or null if none is assigned.

Returns an Array of connections for the given signal.

Returns the list of signals as an Array of dictionaries.

Returns the transform matrix of this item.

Returns the SceneTree that contains this node.

Returns the node's Viewport.

Returns the viewport's boundaries as a Rect2.

Returns this item's transform in relation to the viewport.

Returns the World2D where this item is in.

Returns true if a metadata entry is found with the given name.

Returns true if the object contains the given method.

Returns true if the node that the NodePath points to exists.

Returns true if the NodePath points to a valid node and its subname points to a valid resource, e.g. Area2D/CollisionShape2D:shape. Properties with a non-Resource type (e.g. nodes or primitive math types) are not considered resources.

Returns true if the given signal exists.

Returns true if the given user-defined signal exists. Only signals added using AddUserSignal(String, Array) are taken into account.

Hide the CanvasItem if it's currently visible.

Returns true if the given node is a direct or indirect child of the current node.

Returns true if signal emission blocking is enabled.

Returns true if the object inherits from the given class.

Returns true if a connection exists for a given signal, target, and method.

Returns true if the node is folded (collapsed) in the Scene dock.

Returns true if the given node occurs later in the scene hierarchy than the current node.

Returns true if this node is in the specified group. See notes in the description, and the group methods in SceneTree.

Returns true if this node is currently inside a SceneTree.

Returns true if local transform notifications are communicated to children.

Returns true if the local system is the master of this node.

Returns true if physics processing is enabled (see SetPhysicsProcess(Boolean)).

Returns true if internal physics processing is enabled (see SetPhysicsProcessInternal(Boolean)).

Returns true if processing is enabled (see SetProcess(Boolean)).

Returns true if the node is processing input (see SetProcessInput(Boolean)).

Returns true if internal processing is enabled (see SetProcessInternal(Boolean)).

Returns true if the node is processing unhandled input (see SetProcessUnhandledInput(Boolean)).

Returns true if the node is processing unhandled key input (see SetProcessUnhandledKeyInput(Boolean)).

Returns true if the QueueFree method was called for the object.

Returns true if the node is set as top-level. See SetAsToplevel(Boolean).

Returns true if global transform notifications are communicated to children.

Returns true if the node is present in the SceneTree, its Visible property is true and all its antecedents are also visible. If any antecedent is hidden, this node will not be visible in the scene tree.

Assigns screen_point as this node's new local transform.

Transformations issued by event's inputs are applied in local space instead of global space.

Moves a child node to a different position (order) among the other children. Since calls, signals, etc are performed by tree order, changing the order of children nodes may be useful.

Send a given notification to the object, which will also trigger a call to the _Notification(Int32) method of all classes that the object inherits from.

If reversed is true, _Notification(Int32) is called first on the object's own class, and then up to its successive parent classes. If reversed is false, _Notification(Int32) is called first on the highest ancestor (Object itself), and then down to its successive inheriting classes.

Prints all stray nodes (nodes outside the SceneTree). Used for debugging. Works only in debug builds.

Prints the tree to stdout. Used mainly for debugging purposes. This version displays the path relative to the current node, and is good for copy/pasting into the GetNode(NodePath) function.

Example output:

TheGame
TheGame/Menu
TheGame/Menu/Label
TheGame/Menu/Camera2D
TheGame/SplashScreen
TheGame/SplashScreen/Camera2D

Similar to PrintTree, this prints the tree to stdout. This version displays a more graphical representation similar to what is displayed in the scene inspector. It is useful for inspecting larger trees.

Example output:

┖╴TheGame
   ┠╴Menu
   ┃  ┠╴Label
   ┃  ┖╴Camera2D
   ┖╴SplashScreen
      ┖╴Camera2D

Calls the given method (if present) with the arguments given in args on this node and recursively on all its children. If the parent_first argument is true, the method will be called on the current node first, then on all its children. If parent_first is false, the children will be called first.

Notifies the current node and all its children recursively by calling Notification(Int32, Boolean) on all of them.

Notify the editor that the property list has changed, so that editor plugins can take the new values into account. Does nothing on export builds.

Queues a node for deletion at the end of the current frame. When deleted, all of its child nodes will be deleted as well. This method ensures it's safe to delete the node, contrary to Free. Use IsQueuedForDeletion to check whether a node will be deleted at the end of the frame.

Important: If you have a variable pointing to a node, it will not be assigned to null once the node is freed. Instead, it will point to a previously freed instance and you should validate it with @GDScript.is_instance_valid before attempting to call its methods or access its properties.

Moves this node to the bottom of parent node's children hierarchy. This is often useful in GUIs (Control nodes), because their order of drawing depends on their order in the tree. The top Node is drawn first, then any siblings below the top Node in the hierarchy are successively drawn on top of it. After using raise, a Control will be drawn on top of its siblings.

Removes a node and sets all its children as children of the parent node (if it exists). All event subscriptions that pass by the removed node will be unsubscribed.

Removes a child node. The node is NOT deleted and must be deleted manually.

Removes a node from a group. See notes in the description, and the group methods in SceneTree.

Removes a given entry from the object's metadata. See also SetMeta(String, Object).

Replaces a node in a scene by the given one. Subscriptions that pass through this node will be lost.

Requests that _ready be called again. Note that the method won't be called immediately, but is scheduled for when the node is added to the scene tree again (see _Ready). _ready is called only for the node which requested it, which means that you need to request ready for each child if you want them to call _ready too (in which case, _ready will be called in the same order as it would normally).

Sends a remote procedure call request for the given method to peers on the network (and locally), optionally sending all additional arguments as arguments to the method called by the RPC. The call request will only be received by nodes with the same NodePath, including the exact same node name. Behaviour depends on the RPC configuration for the given method, see RpcConfig(String, MultiplayerAPIRPCMode). Methods are not exposed to RPCs by default. See also Rset(String, Object) and RsetConfig(String, MultiplayerAPIRPCMode) for properties. Returns an empty Variant.

Note: You can only safely use RPCs on clients after you received the connected_to_server signal from the SceneTree. You also need to keep track of the connection state, either by the SceneTree signals like server_disconnected or by checking SceneTree.network_peer.get_connection_status() == CONNECTION_CONNECTED.

Changes the RPC mode for the given method to the given mode. See MultiplayerAPIRPCMode. An alternative is annotating methods and properties with the corresponding keywords (remote, master, puppet, remotesync, mastersync, puppetsync). By default, methods are not exposed to networking (and RPCs). See also Rset(String, Object) and RsetConfig(String, MultiplayerAPIRPCMode) for properties.

Sends a Rpc(String, Object) to a specific peer identified by peer_id (see SetTargetPeer(Int32)). Returns an empty Variant.

Sends a Rpc(String, Object) using an unreliable protocol. Returns an empty Variant.

Sends a Rpc(String, Object) to a specific peer identified by peer_id using an unreliable protocol (see SetTargetPeer(Int32)). Returns an empty Variant.

Remotely changes a property's value on other peers (and locally). Behaviour depends on the RPC configuration for the given property, see RsetConfig(String, MultiplayerAPIRPCMode). See also Rpc(String, Object) for RPCs for methods, most information applies to this method as well.

Changes the RPC mode for the given property to the given mode. See MultiplayerAPIRPCMode. An alternative is annotating methods and properties with the corresponding keywords (remote, master, puppet, remotesync, mastersync, puppetsync). By default, properties are not exposed to networking (and RPCs). See also Rpc(String, Object) and RpcConfig(String, MultiplayerAPIRPCMode) for methods.

Remotely changes the property's value on a specific peer identified by peer_id (see SetTargetPeer(Int32)).

Remotely changes the property's value on other peers (and locally) using an unreliable protocol.

Remotely changes property's value on a specific peer identified by peer_id using an unreliable protocol (see SetTargetPeer(Int32)).

Assigns a new value to the given property. If the property does not exist, nothing will happen.

Note: In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase).

If enable is true, the node won't inherit its transform from parent canvas items.

If set to true, signal emission is blocked.

Assigns a new value to the given property, after the current frame's physics step. This is equivalent to calling Set(String, Object) via CallDeferred(String, Object), i.e. call_deferred("set", property, value).

Note: In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase).

Sets the folded state of the node in the Scene dock.

Assigns a new value to the property identified by the NodePath. The node path should be relative to the current object and can use the colon character (:) to access nested properties. Example:

set_indexed("position", Vector2(42, 0))
set_indexed("position:y", -10)
print(position) # (42, -10)

Defines whether the object can translate strings (with calls to Tr(String)). Enabled by default.

Adds, changes or removes a given entry in the object's metadata. Metadata are serialized and can take any Variant value.

To remove a given entry from the object's metadata, use RemoveMeta(String). Metadata is also removed if its value is set to null. This means you can also use set_meta("name", null) to remove metadata for "name".

Sets the node's network master to the peer with the given peer ID. The network master is the peer that has authority over the node on the network. Useful in conjunction with the master and puppet keywords. Inherited from the parent node by default, which ultimately defaults to peer ID 1 (the server). If recursive, the given peer is recursively set as the master for all children of this node.

If enable is true, children will be updated with local transform data.

If enable is true, children will be updated with global transform data.

Enables or disables physics (i.e. fixed framerate) processing. When a node is being processed, it will receive a at a fixed (usually 60 FPS, see IterationsPerSecond to change) interval (and the _PhysicsProcess(Single) callback will be called if exists). Enabled automatically if _PhysicsProcess(Single) is overridden. Any calls to this before _Ready will be ignored.

Enables or disables internal physics for this node. Internal physics processing happens in isolation from the normal _PhysicsProcess(Single) calls and is used by some nodes internally to guarantee proper functioning even if the node is paused or physics processing is disabled for scripting (SetPhysicsProcess(Boolean)). Only useful for advanced uses to manipulate built-in nodes' behavior.

Warning: Built-in Nodes rely on the internal processing for their own logic, so changing this value from your code may lead to unexpected behavior. Script access to this internal logic is provided for specific advanced uses, but is unsafe and not supported.

Enables or disables processing. When a node is being processed, it will receive a on every drawn frame (and the _Process(Single) callback will be called if exists). Enabled automatically if _Process(Single) is overridden. Any calls to this before _Ready will be ignored.

Enables or disables input processing. This is not required for GUI controls! Enabled automatically if _Input(InputEvent) is overridden. Any calls to this before _Ready will be ignored.

Enables or disabled internal processing for this node. Internal processing happens in isolation from the normal _Process(Single) calls and is used by some nodes internally to guarantee proper functioning even if the node is paused or processing is disabled for scripting (SetProcess(Boolean)). Only useful for advanced uses to manipulate built-in nodes' behavior.

Warning: Built-in Nodes rely on the internal processing for their own logic, so changing this value from your code may lead to unexpected behavior. Script access to this internal logic is provided for specific advanced uses, but is unsafe and not supported.

Enables unhandled input processing. This is not required for GUI controls! It enables the node to receive all input that was not previously handled (usually by a Control). Enabled automatically if _UnhandledInput(InputEvent) is overridden. Any calls to this before _Ready will be ignored.

Enables unhandled key input processing. Enabled automatically if _UnhandledKeyInput(InputEventKey) is overridden. Any calls to this before _Ready will be ignored.

Sets whether this is an instance load placeholder. See InstancePlaceholder.

Assigns a script to the object. Each object can have a single script assigned to it, which are used to extend its functionality.

If the object already had a script, the previous script instance will be freed and its variables and state will be lost. The new script's method will be called.

Show the CanvasItem if it's currently hidden. For controls that inherit Popup, the correct way to make them visible is to call one of the multiple popup*() functions instead.

Translates a message using translation catalogs configured in the Project Settings.

Only works if message translation is enabled (which it is by default), otherwise it returns the message unchanged. See SetMessageTranslation(Boolean).

Queue the CanvasItem for update. will be called on idle time to request redraw.

Updates the warning displayed for this node in the Scene Dock.

Use _GetConfigurationWarning to setup the warning message to display.